DOI: 10.32098/mltj.02.2020.13

Hand-arm vibration in motocross: measurement and mitigation actions

Authors

  • M. Tarabini Department of Mechanical Engineering, Politecnico di Milano University, Milan, Italy
  • N. Mauri School of Mechanical Engineering, Politecnico di Milano University, Milan, Italy
  • I. Gaudio School of Mechanical Engineering, Politecnico di Milano University, Milan, Italy
  • S. Cinquemani Department of Mechanical Engineering, Politecnico di Milano University, Milan, Italy
  • A. P. Moorhead Department of Mechanical Engineering, Politecnico di Milano University, Milan, Italy
  • R. Bongiovanni KITE s.r.l Centre Engineer, Mandello del Lario, Lecco, Italy
  • F. Feletti Department of Diagnostic Imaging, Ausl Romagna, S. Maria delle Croci Hospital, Ravenna, Italy; Department of Electronics Information and Bioengineering, Politecnico di Milano University, Milan, Italy

marco.tarabini@polimi.it

Keywords

Hand-Arm vibrations, transmissibility, riding comfort, steering plate, handlebar, steering system, handlebar’s grip, motocross

Abstract

Objective. This study focused on the quantification of vibration which reaches the hands of motocross riders and on the reduction of such vibration thanks to the handlebar and handlebar mounts.

Background. Vibration transmitted through the hand and arm can lead to vascular and musculoskeletal problems that are well documented in the scientific literature. Controlled studies identifying plate-handlebar characteristics effects on the vibration attenuation in motocross are lacking.

Methods. We measured the vibration exposure of professional and recreational motocross riders on a motocross track and replicated the vibration patterns on a LDS V930 shaker in the laboratory, to analyze the effectiveness of various components in reducing the rider vibration exposure. Laboratory tests were performed with ten subjects randomly gripping different combinations of handlebars and steering plates, and questionnaires were used to evaluate the comfort. Objective measurements of vibration reduction were then compared to the subjective values of perceived comfort.

Results. According to the current EU legislation, the measured vibration levels reach the exposure limit in less than 1h. The mechanical characteristics of the handlebars and steering plates have a limited effect on the vibration transmitted to the rider’s hands. The rubber elements that many manufacturers use to reduce the vibration have limited effects at frequencies that are harmful for the musculoskeletal system. Questionnaires results have no correlation with the measured plate and handlebar performances.

Conclusions. Most of the techniques used to reduce the hand-arm vibration exposure of motocross drivers are ineffective.

View the entire article

Downloads

This article was originally published by Edra S.p.A. and is made available here as part of the Muscles, Ligaments and Tendons Journal archive. Its inclusion in the current Journal archive does not alter the copyright, licensing, or reuse terms applicable at the time of its original publication.

Published

2020-06-30

How to Cite

1.
Tarabini M, Mauri N, Gaudio I, Cinquemani S, Moorhead AP, Bongiovanni R, et al. Hand-arm vibration in motocross: measurement and mitigation actions. MLTJ [Internet]. 2020 Jun. 30 [cited 2026 Nov. 19];10(2). Available from: https://mltj.online/index.php/mltj/article/view/7067

Most read articles by the same author(s)